| View previous topic :: View next topic |
| Author |
Message |
admin Site Admin

Joined: 21 Jan 2005 Posts: 2067 Location: U.S.A
|
Posted: Sun Nov 19, 2006 6:15 am Post subject: Mac mini: Memory Specifications [U] |
|
|
PPC-based Mac mini (G4: 1.25GHz, 1.33GHz, 1.42GHz and 1.5GHz)
Mac mini computers have a single memory slot. This slot accepts a standard PC2700 or PC3200 184-pin DIMM with the following specifications:
- PC2700 or PC3200 Synchronous DRAM (SDRAM)
- 2.5 volt
- 8-byte
- non-parity
- 64-bit wide
- 184-pin module
- maximum of 16 memory devices on the DIMM
- unbuffered—do not use registered or buffered SDRAM
- maximum height of 50 mm
Using PC3200 memory does not provide additional speed benefits. Although the Mac mini supports PC3200 DIMMs, the PC3200 RAM will operate at PC2700 (333 MHz) speeds.
Intel-based Mac mini (Core Solo and Duo 1.5GHz, 1.66GHz and 1.83GHz)
The Mac Mini (Early 2006) has two internal SO-DIMM RAM slots. The computer ships from the factory with at least 512 MB of DDR2 SDRAM; one 256 MB SO-DIMM in each slot. (It may come with more RAM installed, depending on how you ordered the computer from Apple—two 512 MB SO-DIMMs for 1GB total, or two 1GB SO-DIMMs for 2GB total).
The maximum amount of SDRAM supported by the Mac mini (Early 2006) is 2GB (one 1GB SO-DIMM in each slot) with the following specifications:
- PC2-5300
- unbuffered
- nonparity
- 200-pin
- 667 MHz DDR2 SDRAM
DIMMs with the following features are not supported by the Mac mini (Early 2006):
- registers or buffers
- PLLs
- ECC
- parity
- EDO RAM
Intel-based Mac mini (Core Solo, Core Duo and Core 2 Duo 1.5GHz, 1.66GHz, 1.83GHz and 2.0GHz)
The Mac Mini (2006-2008) has two internal SO-DIMM RAM slots. The computer ships from the factory with at least 512 MB of DDR2 SDRAM; one 256 MB SO-DIMM in each slot. (It may come with more RAM installed, depending on how you ordered the computer from Apple—two 512 MB SO-DIMMs for 1GB total, or two 1GB SO-DIMMs for 2GB total).
The maximum amount of SDRAM supported by the Mac mini (Early 2006) is 2GB (one 1GB SO-DIMM in each slot) with the following specifications:
- PC2-5300
- unbuffered
- nonparity
- 200-pin
- 667 MHz DDR2 SDRAM
DIMMs with the following features are not supported by the Mac mini (Early 2006):
- registers or buffers
- PLLs
- ECC
- parity
- EDO RAM
Mac mini (Early 2009), Mac mini (Late 2009), and Mac mini (Mid 2010) computers have two internal memory slots. These slots accept a standard PC3-8500 DDR3 204-pin SO-DIMMs (Small Outline DIMM) with the following specifications:
- PC3-8500 DDR3
- unbuffered
- non-parity
- 204-pin module
- 1066 MHz
DIMMs with the following features will not work with these Mac mini models:
- registers or buffers
- PLLs
- ECC
- parity
- EDO RAM
Mac mini (Mid 2011) computers have two internal memory slots. These slots accept a standard PC3-10600 DDR3 204-pin SO-DIMMs (Small Outline DIMM) with the following specifications:
- PC3-10600 DDR3
- Unbuffered
- Non-parity
- 204-pin module
- 1333 MHz
You can use RAM module sizes of 1 GB, 2 GB, or 4 GB in each slot.
DIMMs with the following features will not work with these Mac mini models:
- Registers or buffers
- PLLs
- ECC
- Parity
- EDO RAM
Last edited by admin on Sat Jul 30, 2011 2:25 am; edited 3 times in total |
|
| Back to top |
|
 |
unplugged New Member

Joined: 18 Jan 2007 Posts: 14
|
Posted: Thu Jan 18, 2007 10:23 pm Post subject: Re: Mac mini: Memory Specifications |
|
|
| will DDR2 PC-5400 work? I'm using PQI in my system and it seems to work okay on my mac mini, but my computer seems to be a big sluggish. I also upgraded to an 80GB 7200 drive and intel core 2 duo 2.0ghz |
|
| Back to top |
|
 |
Zillo New Member


Joined: 31 Jan 2007 Posts: 13
|
|
| Back to top |
|
 |
velocitytrap Member

Joined: 25 Jan 2007 Posts: 85
|
Posted: Tue Feb 06, 2007 6:59 am Post subject: |
|
|
Corsair Launches Mac Memory DDR2-667 SODIMM Product Family for Apple PCs
Mac Memory Product Features/Specifications:
• DDR2-667 SODIMMs
• 1GB upgrade module and 2GB upgrade kit are compatible with the MacBook, the MacBook Pro, and Intel-based versions of the iMac
• 3GB upgrade kit is compatible with the MacBook Pro, and the models of the iMac supporting 3GB of system memory
• Lifetime warranty |
|
| Back to top |
|
 |
Mercyful_Fate New Member

Joined: 10 Dec 2006 Posts: 5 Location: Athens, Greece
|
Posted: Thu Feb 08, 2007 3:56 am Post subject: |
|
|
I've recently upgraded my MacMini G4 1.33 PPC to maximum 1GB DDR RAM.
The memory module I used was SuperTalent 1GB DDR PC3200 with product number D32PB1GJ.
The module has been working excellent for about 10 days since I upgraded, thus I recommend it to other G4 mini users.
p.s.: FYI, I bought it in Greece for 87 Euros, which I consider a very good price (in fact, it's the lowest price you can find for a 1GB DDR module, either PC or MAC), since Apple compatible memories cost here more than 110-115 Euros. _________________ http://www.WeWantAppleGreece.com |
|
| Back to top |
|
 |
James T Kirk Veteran Member


Joined: 23 Aug 2005 Posts: 757 Location: The Netherlands, Europe
|
Posted: Sat Feb 10, 2007 7:48 am Post subject: |
|
|
For Intel I saw the 1 GB sticks are getting more reasonable priced, but I haven't heard much here about the CL value. The CL5 sticks are mostly cheaper but CL4 is a little faster memory. It's pretty hard to decide though, because there are so many types and price differences AND brands. I used to upgrade my G4 with PQI with a CL of 2.5 but I only see these DDR2 sticks in CL4 and 5. Can anybody shed a little light on this? _________________ ___________________Jim©
Now on Hackintosh in G5 case! |
|
| Back to top |
|
 |
bsnoel Senior Member


Joined: 04 Jun 2005 Posts: 355 Location: USA
|
Posted: Sat Feb 17, 2007 9:37 pm Post subject: |
|
|
I used a pair of 1GB SAMSUNG modules in my Mac mini. Samsung is not the cheapest RAM, but its good stuff. Both HP and Sun use Samsung as one of their primary OEMs in their enterprise level servers. Apple uses Samsung for some of their OEM RAM too. If it is good enough for them, it is good enough for me. Generally, most of the HP and Sun servers have either Micron, Samsung, or Infineon RAM or a mix of one or more of them installed. This RAM is not always the fastest available, but it is generally error free and rock solid. _________________ Mac Pro Quad 2.66GHz, PowerMac G5 2.3 GHz, iMac Core Duo 17", MacBook Pro 2GHz, MacBook Pro 2.2GHz, Mac mini Core 2 Duo 1.83GHz. Multi-K9 Security System. No false alarms, just lots of sharp teeth.
www.grweather.com
Last edited by bsnoel on Sat Feb 17, 2007 10:07 pm; edited 1 time in total |
|
| Back to top |
|
 |
bsnoel Senior Member


Joined: 04 Jun 2005 Posts: 355 Location: USA
|
Posted: Sat Feb 17, 2007 10:01 pm Post subject: |
|
|
This might be helpful. Here is an extensive list from Intel for SODIMM memory that they validated to work with their 945 chipsets. The Intel Mac mini uses a version of the Intel 945 mobile chipset. In theory, any one of these part numbers "should" work flawlessly. Of course, you don't have to use this RAM, but if you want to have a little more peace of mind that your are getting the best fit, then ENJOY!
Intel Validated RAM for 945 Mobile Chipset _________________ Mac Pro Quad 2.66GHz, PowerMac G5 2.3 GHz, iMac Core Duo 17", MacBook Pro 2GHz, MacBook Pro 2.2GHz, Mac mini Core 2 Duo 1.83GHz. Multi-K9 Security System. No false alarms, just lots of sharp teeth.
www.grweather.com |
|
| Back to top |
|
 |
velocitytrap Member

Joined: 25 Jan 2007 Posts: 85
|
|
| Back to top |
|
 |
colormetal Junior Member

Joined: 21 Nov 2006 Posts: 20
|
Posted: Tue Feb 20, 2007 6:58 pm Post subject: |
|
|
nice price, just wondering it says that CAS=3, or 2.5 ( for performance stick), is that possible, most of the pc2-5300 is cas4 or cas 5 |
|
| Back to top |
|
 |
GrantSymon New Member

Joined: 28 Dec 2006 Posts: 3
|
|
| Back to top |
|
 |
TyPod Veteran Member

Joined: 30 Nov 2006 Posts: 2184 Location: WI
|
Posted: Sat Feb 24, 2007 11:05 am Post subject: |
|
|
| GrantSymon wrote: | | Can the PPC models (1.42 or 1.5) address more than 1gb? |
The PPC Mac mini's can hold a maximum up to 1GB of RAM. According to Apple. |
|
| Back to top |
|
 |
GrantSymon New Member

Joined: 28 Dec 2006 Posts: 3
|
Posted: Sun Feb 25, 2007 4:08 am Post subject: |
|
|
| TyPod wrote: | | GrantSymon wrote: | | Can the PPC models (1.42 or 1.5) address more than 1gb? |
The PPC Mac mini's can hold a maximum up to 1GB of RAM. According to Apple. |
Yes. But is that because at the time when the specs were written by Apple, 2gb sticks were not available, or is it because the motherboard cannot address 2gb ?
Grant |
|
| Back to top |
|
 |
TyPod Veteran Member

Joined: 30 Nov 2006 Posts: 2184 Location: WI
|
Posted: Sun Feb 25, 2007 3:11 pm Post subject: |
|
|
| GrantSymon wrote: | Yes. But is that because at the time when the specs were written by Apple, 2gb sticks were not available, or is it because the motherboard cannot address 2gb ?
Grant |
I think it's the motherboard. Have you ever seen anyone with 4GB of memory in their Mac mini? I haven't, and to be safe, I would put in 2GB, the recommended maximum. |
|
| Back to top |
|
 |
GrantSymon New Member

Joined: 28 Dec 2006 Posts: 3
|
Posted: Mon Feb 26, 2007 4:45 am Post subject: |
|
|
| TyPod wrote: | | GrantSymon wrote: | Yes. But is that because at the time when the specs were written by Apple, 2gb sticks were not available, or is it because the motherboard cannot address 2gb ?
Grant |
I think it's the motherboard. Have you ever seen anyone with 4GB of memory in their Mac mini? I haven't, and to be safe, I would put in 2GB, the recommended maximum. |
Ehhh ... I was asking about the PPC Mini. |
|
| Back to top |
|
 |
|