| View previous topic :: View next topic |
| Author |
Message |
panoramical Member

Joined: 22 Jul 2005 Posts: 50
|
Posted: Mon Aug 01, 2005 1:32 pm Post subject: Connceting to a BT Voyager 2100 Router |
|
|
Hi,
Just got a Mac Mini, and I am unable to connect to my network using Airport Extreme. I am using a BT Voyager 2100 Router, on a closed network, but I have enabled my MAC address to see the network...any way I can get it working? It just doesn't seem to be connecting.
I am running OSX10.4 |
|
| Back to top |
|
 |
homerjatmoes Senior Member


Joined: 12 Jul 2005 Posts: 323 Location: Elmira, NY
|
Posted: Mon Aug 01, 2005 8:16 pm Post subject: Re: Connceting to a BT Voyager 2100 Router |
|
|
| panoramical wrote: | Hi,
Just got a Mac Mini, and I am unable to connect to my network using Airport Extreme. I am using a BT Voyager 2100 Router, on a closed network, but I have enabled my MAC address to see the network...any way I can get it working? It just doesn't seem to be connecting.
I am running OSX10.4 |
If you can hook the mini to the router through the ethernet port and see if everything is working that way.
As fort the wireless when I am having trouble the best way is to lessen restrictictions and then turn them back on. If you are not broadcasting your ssid start there, then remove MAC filtering, and then encryption. It would also be best if you can get connected at least in the same room as the wireless access point to rule out any interference.
When rolling back security measures do them one at a time and as soon as it connects re-enable them one at a time.
Good luck _________________ 1.42Ghz
1GB RAM
200GB FW HDD (Boot drive)
80GB HDD
External DVD burner
45.23 Xbench 1.2 average
FireWire Boot Guide |
|
| Back to top |
|
 |
Susurrus Veteran Member


Joined: 05 May 2005 Posts: 1303 Location: Providence, Rhode Island
|
Posted: Mon Aug 01, 2005 8:59 pm Post subject: |
|
|
So you're trying to connect using your Airport Express to your wireless router? Can you see the network SSID on your Mini? Is anything else hooked up to the router or you're sure that it's broadcasting? If you can connect, what's it say after you try to connect. _________________ Computer Engineer
Junior, Brown University
15" NC8430 HP Laptop
1.42Ghz PPC Mac Mini, 1Gb RAM, 1st Gen
40GB G4 iPod
2GB Black iPod Nano |
|
| Back to top |
|
 |
panoramical Member

Joined: 22 Jul 2005 Posts: 50
|
Posted: Thu Aug 04, 2005 5:44 pm Post subject: |
|
|
Hi,
I removed all features that could potentially block my Mini.
So, now it connects. It connects perfectly, but firstly, ALL the other computers are knocked off the network, and the internet doesn't even work on my mini...
Thanks in advance for your help. |
|
| Back to top |
|
 |
homerjatmoes Senior Member


Joined: 12 Jul 2005 Posts: 323 Location: Elmira, NY
|
Posted: Thu Aug 04, 2005 6:25 pm Post subject: |
|
|
| panoramical wrote: | Hi,
I removed all features that could potentially block my Mini.
So, now it connects. It connects perfectly, but firstly, ALL the other computers are knocked off the network, and the internet doesn't even work on my mini...
Thanks in advance for your help. |
At one windows machine, reset the connection so that it does not use encryption and check conectivity.
At the mini, can you access the routers configuration page? If so check and make sure you did not shut off NAT or the DHCP server.
If you jot down or make print screens of all your settings, it may be best to reconfigure the router from scratch by resetting to factory defaults. Next connect all computers without any encryption or filtering and allow ssid to be broadcast.
If the all connect start securig the router by MAC address, then encryption, and then turn off ssid broadcast. At each step check each computer.
As extra security it would be a good time to change passwords and ssid. _________________ 1.42Ghz
1GB RAM
200GB FW HDD (Boot drive)
80GB HDD
External DVD burner
45.23 Xbench 1.2 average
FireWire Boot Guide |
|
| Back to top |
|
 |
|